訂貨代碼 : BAW001Z
BAW M18ME-UAC50B-BP00,2-GS04
Keyfeatures
Size M18
Connection Pigtail, M12x1-S04, 0,2m, PUR
Linearity range Sl 1...5 mm
Output voltage at Sl min. 0 V
Output voltage at Sl max. 10 V
General attributes
Mechanical installation condition Flush (shielded)
Power indicator No
Basic standard BWN PR 44, IEC 60947-5-7
Enclosure Type per IEC 60529 IP67
Protected against polarity reversal Yes
Protected against miswiring Yes
Additional text Values referenced to axial approach of St 37 target. For other materials correction factors are applied.
When used in Balluff clamping holders, Ua may be reduced by max. 10%
Series M18
Electrical attributes
Connection type Pigtail
Rated operating voltage Ue DC 24
Rated frequency, AC DC
Rated insulation voltage Ui 75 DC
Electrical version DC, direct current
Ripple max. (% of Ue) 15
Principle of operation Inductive
Limit frequency -3dB 500 Hz
Output voltage at Se 5 V
Non-linearity max. ±120 µm
No-load current max. Io at Ue 10 mA
Operating voltage 15...30 V DC
Mechanical attributes
Tightening torque 25 Nm / 35 Nm
Cable short designation LiFYY11Y-O
Cable length 0,2 m
Connector type M12x1-S04
Oberflächenschutz Nickel-plated
Shock rating Shock, half-sinus, 30 gn, 11ms
Vibration rating 55 Hz, 1 mm ampl., 3x30 min
Ambient temperature Ta min. -10 °C
Ambient temperature Ta max. 70 °C
Degree of contamination 3
Sensing surface material PBT
Housing material Brass
Cable jacket material PUR
Cable diameter D max. 5,1
Response time 1 ms
Measuring speed max. 40 m/s
Optical operating temperature min. 10 °C
Optical operating temperature max. 50 °C
Max. temp. drift from end value ±5.0 %
Temperature coefficient min. 0.0 µm/K
Temperature coefficient max. -4.0 µm/K
Temperature coefficient typ. -1.0 µm/K
Repeat accuracy per BWN ±8.0 µm
Adjustment indicator Yes
Repeat acc. R of end value max. 3
Rated operating dist. Se 3 mm
